View AGOF3S3_4289462.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

THE CONNOR-WINFIELD CORP.
2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. HTTP://WWW.CONWIN.COM
PRODUCT
DATA
SHEET
CRYSTAL CONTROLLED OSCILLATORS
14 PIN DIP 3.3V HCMOS STRATUM 3 OCXO
CW 0440 AGOF3S3 12.800M
ABSOLUTE MAXIMUM RATINGS
PARAMETER Storage Temperature Supply Voltage (Vcc) UNITS MINIMUM -40 -0.5 NOMINAL MAXIMUM 85 4.5 UNITS C Vdc
TABLE 1.0 NOTE
AGOF3S3
DESCRIPTION
OPERATING SPECIFICATIONS
PARAMETER Center Frequency Frequency Calibration Frequency Stability Aging (Daily) Aging (20 Years) Total Frequency Tolerance Operating Temperature Range Supply Voltage Supply Current Phase Jitter (BW=12KHz to 20MHz) Phase Jitter (BW=10Hz to 20 MHz) Period Jitter SSB Phase Noise at 10Hz offset SSB Phase Noise at 10KHz offset Warm Up Time TDEV @ 1.0 Sec. TDEV @ 4.0 Sec. (Vcc) (Icc) (Fo) MINIMUM 1.544 -1.5 -0.25 -30 -2.5 -4.6 0 3.135 NOMINAL 3.3 -90 -135 MAXIMUM 20.0 1.5 0.25 30 2.5 4.6 70 3.465 450 1 3 5 5 1 2 UNITS MHz ppm ppm ppb ppm ppm C Vdc mA ps rms ps rms ps rms dBc/Hz dBc/Hz Minutes nS nS
TABLE 2.0 NOTE 1 2 3 4
The Connor-Winfield AGOF3S3 is a hermetically sealed 14 Pin DIP, 3.3V Oven Controlled Crystal Oscillator (OCXO) with an HCMOS/TTL compatible output. The AGOF3S3 is designed for higher stability Stratum 3 applications requiring low jitter and tight frequency stability.
5
FEATURES
TABLE 3.0
HCMOS OUTPUT CHARACTERISTICS
PARAMETER LOAD Voltage (High) (Low) Current (High) (Low) Duty Cycle at 50% of Vcc Rise / Fall Time 10% to 90% MINIMUM 2.6 -4 45 NOMINAL 50 MAXIMUM 15 0.4 4 55 6 UNITS pf Vdc Vdc mA mA % nS
3.3V OPERATION LOW JITTER <1pS RMS FREQUENCY STABILITY: 0.25ppm TEMPERATURE RANGE: 0 to 70C FREQUENCY TOLERANCE OF 4.6ppm OVER TWENTY YEARS
NOTE
(Voh) (Vol) (Ioh) (Ioh)
PACKAGE CHARACTERISTICS
Package
TABLE 4.0 14 pin DIP, hermetically sealed, grounded case, welded package
Notes: 1) 2) 3) 4)
Initial calibration @ 25C Frequency vs. temperature stability, 0 to 70C absolute. At the time of shipment after48 hours of operation. Inclusive of calibration, operating temperature range, supply voltage change, load change, shock and vibration, 20 years aging. 5) Measured @ 25C, within 5 minutes, the unit will be within +/-0.1ppm of its reference frequency, measured after 30 minutes of continuous operation at a stable 25 C.
ORDERING INFORMATION
AGOF3S3
OCXO SERIES
- 12.800MHz
CENTER FREQUENCY
Specifications subject to change without notice. DATA SHEET #: Cx011 PAGE 1 OF
2
REV: 06
DATE:
11/12/04
aCopyright 2001 Connor-Winfield all rights reserved.
THE CONNOR-WINFIELD CORP.
2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722.
PRODUCT
D ATA
SHEET
CRYSTAL CONTROLLED OSCILLATORS
ENVIRONMENTAL CHARACTERISTICS Temperature Cycle: Per MIL-STD-883, Method 1010, Condition B. -55C to 125C, 20 cycles,10 minute dwell, 1m inute transition. Gross Leak Test: Per MIL-STD-202, Method 112, Condition D. No bubbles in flourinert (FC-43) at 125C 5C for 20 seconds. SOLDERING Pin Solderability: Per MIL-STD-883, Method 2003. 8 hour steam age prior to 245C 5C Solder pot dip, 95% Coverage. Resistance to Solder Heat: Per MIL-STD-202, Method 210, Condition C. Wave: Topside board -mount product, 260C 5C for 20 Seconds. MECHANICAL CHARACTERISTICS Vibration: Per MIL-STD-202, Method 204, Condition A. 10G's peak, 10Hz to 500Hz, 15mi nute cycles 12 times each perpendicular axis. Shock: Per MIL-STD-202, Method 213, Condition D. 500G's, 1ms, half sine, 3 shocks per direction. Moisture Resistance: Per MIL-STD-202, Method 106. 95% RH @ 65C, 10 cycles 10C to 65C.
+3.3Vdc
Specifications subject to change without notice. DATA SHEET #: Cx011 PAGE 2 OF
2
REV: 06
DATE:
11/12/04
aCopyright 2001 Connor-Winfield all rights reserved.

▲Up To Search▲

Price & Availability of AGOF3S3

	To Download AGOF3S3 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .